lightnin
05-22-2006, 05:28 PM
Item name: 80+ Complete Solid Axle Swap
Price: $1500
Description:
More like a Feeler thread. I am thinking of sellin my SAS D44 and everything with it. Everything is rebuilt. Bolt in swap with a few holes drilled.
It is the:
D44
Rebuilt, new bearings, seals, 4.10 welded carrier, new u-joints, Rock guard, 8 lug outters with warn premium hubs, new pads, turned rotors.
Dick Cepek 5.5" Progressive rate Coils. New
TTB adapters thanks for the help Chris.
Degreed Radius arm brackets with New Skyjacker Drop Brackets
1.5" dom Trac bar with 3/4" Heims
New Ball Joints, C bushings and RA bushings
New superlift Shocks
Steering I am going to keep until I decide what I am going to run. This setup has 0 miles on it. Nets about 8" lift with a 351w sitting under the hood. This is a 98% bolt in SAS. I can get better pics Have the trac bar cut. Just needs the brackets welded and your good to go
http://www.supermotors.org/getfile/273063/fullsize/100_2328.JPG
http://www.supermotors.org/getfile/269956/fullsize/100_2165.JPG
Location (City): Central Arkansas
ZIP CODE (for shipping calculations): 72118
Will you Ship? (Y/N): Would like to meet instead of ship
Method of shipment (UPS, FedEx, etc): Fedex Freight
Payment method (PayPal, check, MO, etc): Any
Price: $1500
Description:
More like a Feeler thread. I am thinking of sellin my SAS D44 and everything with it. Everything is rebuilt. Bolt in swap with a few holes drilled.
It is the:
D44
Rebuilt, new bearings, seals, 4.10 welded carrier, new u-joints, Rock guard, 8 lug outters with warn premium hubs, new pads, turned rotors.
Dick Cepek 5.5" Progressive rate Coils. New
TTB adapters thanks for the help Chris.
Degreed Radius arm brackets with New Skyjacker Drop Brackets
1.5" dom Trac bar with 3/4" Heims
New Ball Joints, C bushings and RA bushings
New superlift Shocks
Steering I am going to keep until I decide what I am going to run. This setup has 0 miles on it. Nets about 8" lift with a 351w sitting under the hood. This is a 98% bolt in SAS. I can get better pics Have the trac bar cut. Just needs the brackets welded and your good to go
http://www.supermotors.org/getfile/273063/fullsize/100_2328.JPG
http://www.supermotors.org/getfile/269956/fullsize/100_2165.JPG
Location (City): Central Arkansas
ZIP CODE (for shipping calculations): 72118
Will you Ship? (Y/N): Would like to meet instead of ship
Method of shipment (UPS, FedEx, etc): Fedex Freight
Payment method (PayPal, check, MO, etc): Any