doing new color scheme

[bigbroncojeff]

well my factory metallic paint is oxidizing like crazy all of the sudden on the hood and the roof... so i need to do something about it... it's going to be a garage/driveway job nothing fancy but i want it to look ok... and i am not doing any body work that will require bondo just some places will be hammered out some then painted over... i am thinking of getting rid of the eddie bauer scheme and going to something like this... using red durabak for the lower half (the hard glossy bedliner) and staying close to stock semimetallic navy (using sprayon duplicolor like *******/pepboys/etc. have)... i want to keep some navy so i don't have to worry about having the wrong color doorjambs or the wrong color interior or underhood paint.... anyone have suggestions or ideas

oh and for the record... i am not painting my stock rims... i have those beadlocks on the way that will be hammered black... and if i do the bronco red they may have some sort of red accent

to this:

http://www.supermotors.org/getfile/331258/fullsize/redblueblur.jpg

from this:

http://www.supermotors.org/getfile/282909/fullsize/smallerorig.jpg

and here's where i got the idea although it is black and red... i thought it looked awesome in person

http://www.supermotors.org/getfile/312769/fullsize/DSCF0089.JPG
http://www.supermotors.org/getfile/312771/fullsize/DSCF0180.JPG

[Froggmann]

If your going to go with somethign like that put a little flair in it. Keep the top black paint the very front of the hood white comming down to both sides and have a white stripe going down the side from where the red is down to the original pinstripe on the side. Sorry, can't do a pic don't know PS.

[Blanco]

How about Orange & Black? :shrug:
To give it some kinda http://bestsmileys.com/halloween3/13.gif theme?

[bigbroncojeff]

How about Orange & Black? :shrug:
To give it some kinda http://bestsmileys.com/halloween3/13.gif theme?
nah... have to keep navy in it or i have to do the entire thing inside and out.... don't want to be a harley wanna be either

If your going to go with somethign like that put a little flair in it. Keep the top black paint the very front of the hood white comming down to both sides and have a white stripe going down the side from where the red is down to the original pinstripe on the side. Sorry, can't do a pic don't know PS.

i have no idea what you are talking about:6:

[Blanco]

I think he means seperate the top & bottom colors with some sort of white strip..:6:

[bigbroncojeff]

thought about doing something like this all the way down to divide it up but might be a little tough with the durabak but can be done... would look cooler than hell too

http://www.houseoftints.com/images/600_FlamePinstripe.jpg

and they have a bunch at this shop... tribal, flames , whatever
http://www.speedgraphics.net/cgi-bin/quikstore.cgi?category=stripes

in particular these diabloflames in silver
http://www.speedgraphics.net/images/pinstripe-diablo.jpg

[Couch Slouch]

I think a dark metallic silver / charcoal grey would look good with the factory Navy.And if you add the flame design make that red.Looks good in my mind.